
棘轮带
绑扎带,系上带子
A ratchet strap also called tie down strap or lashing straps in widths of 1, 2, 3, and 4 inches, made from a polyester mesh blend that provides industrial grade strength typically for cargo securement with the use of hardware. Ratchet straps are used to hold down cargo or equipment during transport, to make sure the sometimes extremely heavy cargo does not shift or fall during the move.
- Gallery
- Video
-
- 相关产品
-
-
中等重量窄织物织机机
kdn mg.
体重窄织物织机机生产of army belt, cargo lashing, safety harness, etc. The Needle Loom Machine output ranges with 2 or 4 numbers of tape width from min 55mm to max 110mm, the weft density is available from 3.5cm to 36.7cm, uses specific tape bracket for weaving heavy duty tape, material of reed adopts forging aluminum and slightly increased the opening of shedding lever to facilitate adjustment. The adopt rigid is driven by strengthening the power of roller, KDN-MG Needle Loom Machine attached two-speed motor, easy in adjustment, and universal shedding levers are shared, and low load, less noise, and more steadiness coexist well.
-
Medium And Heavy Narrow Fabric Weaving Machine
NDM.
中型和重型织物织物织机输出带有2个磁带宽度从MIN 80mm到最大165mm,纬纱密度可从2.46cm到11.67cm,带凸轮系统或36件摘机编织。中型和重型织物织物编织机加强了机器结构,通过提高机器的稳定性,在高速性能下使振动最小化。中型和重型织物织物织机安装正润滑系统,以增强润滑系统,在顶部添加安全盖,用于织造设备,以保护用户的安全性并满足CE标准。
-
High Quality Heavy Narrow Fabric Weaving Machine
HTM
重型织物织物织物可以编织5mm〜6mm厚的胶带,输出范围与2个磁带宽度为180mm,纬线可在2.46cm至11.67cm中拍摄凸轮系统编织。重型窄织物织机加固机械结构,最大限度地减少了高速性能下机器稳定性的振动。脱落框架的开口增加用于编织厚,重型胶带,通过使用齿轮型传动和拉出的拉出将增加。
-
重型织物织机机
ENH
ENH Heavy Narrow Fabric Loom Machine is developed for industrial textile. Suitable for producing slings thickness max of 8mm, and width ranges with 85mm to 370mm, output ranges with 1or 2 number of tapes. The weft density is available from 2.46cm to 11.67cm in the CAM system to weave.Heavy Narrow Fabric Loom Machine reinforce the structure, minimize the vibration by increased the stability of machine under high speed performance. Heavy narrow fabric loom machine use automatic yarn feeding and weft feeding device or belt-type weft feeding device during weaving, so that the tension during feeding can be balanced and the yarn is not easy to break.The weaving system 1 to 3 can be used for weaving, and can monitor broken weft, warp, broken bottom thread, reeling, etc. The machine parts are made of real materials, precision machining, durable for many years, and low depreciation rate.
-
Hot Products


